So, these are the best UV lamp for curing resin. If you require a great drying lamp that would suit all your resin curing needs, we highly recommend you to purchase the Teressa Nail Lamp. Its 36 lamps deliver a total output power of 72 Watts that gives you enough energy to cure every single type of gel, quickly and effectively.
UV light can be the answer to all your problems. Normal epoxy resin can take up to 7 days to fully complete the curing process and it becomes ready for light use after 24 hours. But with UV-curing resin, it only takes about 15-20 minutes to cure each side with a UV lamp. In this article, I’ll discuss everything you need to know about UV Olena Rudo/Shutterstock. Since the problem arises under the UV lamp, you might want to chat with your manicurist to see if they can adjust the settings on the device. Alternatively, ask them to apply the gel in thinner coats because the thicker it is, the more heat is generated, and the more you feel the burn, as Paul Bryson, a principal 5. Shellac Requires a Specific Lamp. Since the Shellac is half-gel, the application process is pretty much the same – you prepare the nails, start with a base coat, followed by one or two layers of the Shellac, and a top coat to finish. Each layer needs to be cured, just like any gel would require. It comes in 91 shades and can be commonly found in many drugstores. It claims to give up to 14 days of colour & shine. You can remove it like regular nail polish and requires no soaking or scraping. Size: 14.7mL. Directions. Make sure nails are clean and dry. Use nail polish remover to wipe away any residue on the nail. . 140 345 340 202 235 162 117 167 348